🛡️ HSE Lead — 215 certification & training programmes · Instantly Verifiable Certificates
← All articles
Best Practice · 7 min read

Fire Safety in the Workplace: Prevention, Extinguishers and Evacuation Plans

Most workplace fires are preventable. Learn the fire triangle, extinguisher types, fire risk assessment, alarms and how to run an effective evacuation drill.

12 April 2016 · HSE LEAD

Fire can destroy a business in minutes and cost lives in less. Good fire safety combines prevention, detection, protection and escape. The following checklist works for offices, workshops, warehouses and sites.

Understand the fire triangle

Fire needs three things: fuel, oxygen and a source of ignition (heat). Remove any one and the fire cannot start or continue. Prevention means keeping fuels and ignition sources apart.

Common causes of workplace fires

  • Faulty or overloaded electrical equipment
  • Hot work such as welding and cutting
  • Poor housekeeping and stored waste
  • Flammable liquids and gases
  • Heating equipment placed near combustibles
  • Smoking in prohibited areas

Fire risk assessment

Identify ignition sources, fuels and oxygen sources; identify who is at risk; evaluate and reduce the risk; record, plan and train; and review regularly.

Detection and alarm

Smoke and heat detectors, manual call points and audible alarms give early warning. Test them on a schedule and keep test records.

Fire extinguishers: choose the right type

Fire classFuelTypical extinguisher
AWood, paper, textilesWater, foam, dry powder
BFlammable liquidsFoam, CO₂, dry powder
CFlammable gasesDry powder (isolate the gas first)
ElectricalLive equipmentCO₂ or dry powder
F / KCooking oils and fatsWet chemical

Use the PASS method: Pull the pin, Aim at the base, Squeeze the handle, Sweep side to side — and only fight a small fire with a clear escape route behind you.

Escape routes and evacuation

  • Keep exits and routes clear, unlocked and signed.
  • Provide emergency lighting.
  • Appoint and train fire wardens and plan help for people who need assistance.
  • Choose assembly points that are safe and away from the building.
  • Run drills at least once a year and review how it went.
Key takeaway: Prevent, detect, protect and practise. A drill that has been rehearsed saves minutes when it matters.

Frequently asked questions

How often should extinguishers be inspected?

Do a quick visual check monthly and a full servicing at least annually by a competent person.

Who needs fire training?

Everyone needs awareness; wardens and fire watch need more. Browse our fire safety courses.

Ready to verify or get certified?

Check a certificate in seconds, or browse our certification programmes.

Verify a certificate Browse courses

Comments

No comments yet. Be the first.

Comments are reviewed before they appear.